Virtuino Tutorial 02 : Ethernet Shield connection

Tutorial description:

Enable or disable a LED connected to Arduino pin 5 via Virtuino App using Interner connection


Step 1: Arduino connections

Connect a Led to Arduino pin 5





Step 2: Install VirtuinoCM library to Arduino IDE software


a. Install VirtuinoCM library using the Arduino Library Manager

On Arduino IDE software go to Menu/Sketch/Include Library/Manage Libraries  to open the Library Manager

On the search line enter VirtuinoCM.

Install the Virtuino CM library


If you can't install the library using the library manager you can install the library manually using the links below:

VirtuinoCM library (zip file)


On Arduino IDE software go to Menu/Sketch/Include Library/Add zip libraryThen load the library zip file


Step 3: Load the Ethernet example sketch 

  1. Go to Menu/File/Examples/VirtuinoCM
  2. Select the example: Ethernet_ex1_getting_started



On the code enter the  correct IP address.

This depends on your router IP

If your Router IP is enter an ip like

If your Router IP is enter an ip like etc.



When you are ready connect Arduino board to a USB port  and upload the code


Step 4: Virtuino app settings

Enable your Android device internet connection 

Run Virtuino app