Synchronize text T[] with ESP32

[Dionysos]

Hi,

Ilias, I would like your opinion on my approach 

I want to use the ESP32 in AP mode to initialize STA mode. So I synchronize text variables (conversions of char SSID and char password).

As Virtuino 6 allows to declare text variables T[], to synchronyse them i have declared an array of String :
String T[10];  // array for 10 text values

This allows  enums, easy to use in the code than V40, V41... as text : 
enum ePinsAP {
eButtonValid = 0,  // Virtuino virtual V Memory V[0]
eSsidNetwork = 1, // Virtuino virtual T Memory T[1]
ePwNetWork = 2,
};


... Setup ...
V[eButtonValid] = 0;  // Valid SSID_STA
T[eSsidNetwork] = "";
T[ePwNetWork] = "";



So I added an "if (variableType == 'T')" test in the onReceived and onRequested functions : 

void onReceived(char variableType, uint8_t variableIndex, String valueAsText) {
if (variableType == 'V') {
// Modified to take case of text values
// float value = valueAsText.toFloat();                          // convert the value to float. The valueAsText have to be numerical
if (variableIndex < V_memory_count) {
float value = valueAsText.toFloat();  // convert the value to float. The valueAsText have to be numerical
V[variableIndex] = value;            // copy the received value to arduino V memory array
}
// else if (variableIndex == 40) V40 = valueAsText;
//  ..
}
if (variableType == 'T') {
T[variableIndex] = valueAsText;
}
}

String onRequested(char variableType, uint8_t variableIndex) {
if (variableType == 'V') {
if (variableIndex < V_memory_count) return String(V[variableIndex]);  // return the value of the arduino V memory array

// else if (variableIndex == 40) return V40;  // return the value of the V0 variable
//..
}
if (variableType == 'T') {
return T[variableIndex];
}

return "";
}


It works well. But I read that you don't recommend using T[] variables.
Will you remove them in future versions of virtuino 6 ?
For this use, i would be disappointed.

Thanks for your opinion.

Denis