01-30-2023, 12:01 AM
Hi,
I apologize for any confusion caused.
The "Multiple chart" is the classic chart for the app.
Follow the next steps:
1. Download the two values from Thingspeak. Store them by selection the field1 and field2.
2. Use a script to multiply them. Store the result to M1
3. Add a "Value recorder". Select the M1 for storing. Enter a filename.
The value of M1 will be stored to a file every time it is changed (it is a choice).
4. Add a "Multiple Chart". Select the same filename with the "Value recorder"
5. Lock the panel. Connect. Click on the "Value recorder" icon to enable the rec state.
In case the values uploaded to the Thingspeak platform with the same request.(That is recomented by the platform).You can enable the option "Use one request to read all..." on the "Thingspeak server settings" inside the app.
I apologize for any confusion caused.
The "Multiple chart" is the classic chart for the app.
Follow the next steps:
1. Download the two values from Thingspeak. Store them by selection the field1 and field2.
2. Use a script to multiply them. Store the result to M1
3. Add a "Value recorder". Select the M1 for storing. Enter a filename.
The value of M1 will be stored to a file every time it is changed (it is a choice).
4. Add a "Multiple Chart". Select the same filename with the "Value recorder"
5. Lock the panel. Connect. Click on the "Value recorder" icon to enable the rec state.
In case the values uploaded to the Thingspeak platform with the same request.(That is recomented by the platform).You can enable the option "Use one request to read all..." on the "Thingspeak server settings" inside the app.