09-12-2022, 10:28 AM
(This post was last modified: 09-12-2022, 10:29 AM by iliaslamprou.)
Ηι,
No,
but you can use the application V memory to transfer the motor commands to the board and then based on those values you will adjust the motor movement commands.
I think you don't need an example. You can modify the default examples for Virtual pins
No,
but you can use the application V memory to transfer the motor commands to the board and then based on those values you will adjust the motor movement commands.
I think you don't need an example. You can modify the default examples for Virtual pins