Hello
Is it possible to connect the application to another IoT cloud? I mean exactly Thinger.io
I would like to read some thermometers, relays and charts.

Thank You

Hello Ilias!
It is very necessary to display large text on the display from a variable with a carry line, for example String 1\nString 2\nString 3\n......String x.
In the settings of the Value Display widget, when selecting the Text type, there is not enough setting for a fixed font height. For this reason, the remaining lines remain invisible.
Please make this possible. Well, or a separate widget for displaying a test with line breaks.

Hello Ilias!
Thank you so much for your wonderful program!
I encountered a problem with the lack of a color scale in the Linear gauge widget on the iOS system. On the Android system there is a color scale.
Can this flaw be corrected?

Attached Files

Thumbnail(s)
       

Hello guys!

I did a project for a tape player remote control, which also has an Adafruit FM broadcaster connected. Having noted that every bluetooth seance with server raises noise in demodulated FM signal, I have reduced the refresh time to 100 seconds as a trade-off between performance and quality. This large period does not affect commands, sent from phone to server, which takes place immediately. But feedback signal from server comes back to phone as per defined server's refresh setting only. How could this be fixed to get the same performance, as happens to commands, sent from phone to server direction?

Ilia, congratulations on the excellent work you have done with the Virtuino application.
I am facing an issue when I publish a greek string to a mqtt server topic through your application. The Greek letters that the pop-up editor sends in the value display widget, are probably sent with incorrect encoding. For example, when I write "hello" on the popup and and send it, it appears as in the following image https://imgur.com/lcYjXNg in the value display and the same appears in the corresponding server topic (I tried hivemq and thingspeak). Subscribe topic reads from server, appears normally if I write the Greek word with another mqtt client. So the problem is in the sending.
Thanks in advance.

Attached Files

Thumbnail(s)
   

Hi,

I have problems using the "RGB led and controller" widget in Virtuino v6.0.34 on my Android phone:

I've configured four sliders controlling the red, green, blue and white LEDs of an LED strip using MQTT. No problem with these four widgets. When I move a slider I can see the published values with "mosquitto_sub" on my home server. See "panel_on_slider_change.png" and the corresponding output of "mosquitto_sub" in "mosquitto_sub_output_on_slider_change.png". I've also made a screenshot of my configuration (see "slider_config.png" and "topic_config.png").

When I choose a colour with the mentioned "color picker" (which uses the same topics - without the white color of course - see "picker_config.png") the sliders follow the picker correctly (they visualise the color I've "picked"). But the values received by my server are completely weird. I receive values for "blue" only - and even these values aren't correct (for me they look somehow random).

Does anyone have an idea what's wrong with my setup/config?

Attached Files

Thumbnail(s)
                   

Hi! I´m Max from Argentina. I´m using Virtuino IOT to manage a Siemens Logo! 8.3 via Modbus. It works like a charm inside my client´s LAN.
But, I have to control it also from Internet. The LOGO! is registered in AWS IOT and I can see its shadow working properly.

I know Modbus but I´m still new to these new IOT technologies.

Can Virtuino interact with an AWS thing´s shadow via MQTT? 
Or, is there a more practical way to control these PLCs from internet with Virtuino?


Thanks!

Hallo,
is possible to make a widget like a windows console?

While downloading the latest virtuino 0.6.21 , Microsoft Defender found a virus.

   

Good night. I am developing a project with Arduino Mega and Viretuino6 with Bluethoot HC06.
I need the 3 series ports to communicate with different peripherals.
But one is used by the Bluethoot module.
I have thought about using the Bluno Mega from DFRobot that has Bluetooth integrated but I don't know how to adapt it to the Virtuino routines.
Has anyone used Virtuino with the DFRobot Bluno Mega?
Thanks for the advance