Virtuino SE Tutorial: Communication with Arduino + Ethernet shield






Download the following example:

Arduino + Ethernet Shield example - JSON API

Unzip and load the example code to Arduino IDE software



Configure the example code

2. Enter an IP address for your ehternet connection

The IP has to have the same three first numbers with your router IP

For example if your router IP is select an IP like




1. Connect the Arduino to usb port of your PC

2. Select the board Arduino UNO.

3. Select the correct port

4. Upload the example

3. After the uploading open the serial monitor. 

You will see the IP address of the Ethernet shield



Run Virtuino SE app