<![CDATA[Virtuino Forum - Virtuino 6]]> https://virtuino.com/forum/ Sat, 16 May 2026 01:55:19 +0000 MyBB <![CDATA[Virtuino Esp8266 e telegram]]> https://virtuino.com/forum/showthread.php?tid=22342 Wed, 18 Feb 2026 21:15:23 +0000 DFCARLO]]> https://virtuino.com/forum/showthread.php?tid=22342 Mi piacerebbe fare qualche progetto con Virtuino6 ESP8266 e telegram. Che ne dite sarebbe molto interessante mandare e ricevere dati tramite bot di telegram visto che risponde molto velocemente. 

Grazie]]> Mi piacerebbe fare qualche progetto con Virtuino6 ESP8266 e telegram. Che ne dite sarebbe molto interessante mandare e ricevere dati tramite bot di telegram visto che risponde molto velocemente. 

Grazie]]> <![CDATA[OTA integration]]> https://virtuino.com/forum/showthread.php?tid=22338 Mon, 26 Jan 2026 08:01:18 +0000 Araqel]]> https://virtuino.com/forum/showthread.php?tid=22338 For example, the "Aygedzor_copy.ino" 's compiled binary consist of 4 files and flashing arguments looks this:
Code:
--flash-mode dio --flash-freq 80m --flash-size 4MB 
0x0 Aygedzor_copy.ino.bootloader.bin 
0x8000 Aygedzor_copy.ino.partitions.bin 
0xe000 boot_app0.bin 
0x10000 Aygedzor_copy.ino.bin
Can we have hope that both Virtuinoes will get such an OTA integration in further release?]]> For example, the "Aygedzor_copy.ino" 's compiled binary consist of 4 files and flashing arguments looks this:
Code:
--flash-mode dio --flash-freq 80m --flash-size 4MB 
0x0 Aygedzor_copy.ino.bootloader.bin 
0x8000 Aygedzor_copy.ino.partitions.bin 
0xe000 boot_app0.bin 
0x10000 Aygedzor_copy.ino.bin
Can we have hope that both Virtuinoes will get such an OTA integration in further release?]]> <![CDATA[Android device sensors]]> https://virtuino.com/forum/showthread.php?tid=22336 Mon, 20 Oct 2025 17:56:15 +0000 gas]]> https://virtuino.com/forum/showthread.php?tid=22336 I wish to know if it's possible to send the Android devices sensors values to a server different from Emulator.

Thanks in advance.]]> I wish to know if it's possible to send the Android devices sensors values to a server different from Emulator.

Thanks in advance.]]> <![CDATA[What happens under "Advanced Value display" hood?]]> https://virtuino.com/forum/showthread.php?tid=22328 Sun, 17 Aug 2025 16:24:31 +0000 Araqel]]> https://virtuino.com/forum/showthread.php?tid=22328 Thanks in advance.]]> Thanks in advance.]]> <![CDATA[Update interval/Refresh rate]]> https://virtuino.com/forum/showthread.php?tid=22325 Thu, 10 Jul 2025 05:21:01 +0000 Stefan]]> https://virtuino.com/forum/showthread.php?tid=22325 I tried refresh rate 0 and 0.1. No change.
Is there an Idea how to increase update interval?]]> I tried refresh rate 0 and 0.1. No change.
Is there an Idea how to increase update interval?]]> <![CDATA[Send a value to app from ESP32]]> https://virtuino.com/forum/showthread.php?tid=22281 Sat, 16 Nov 2024 14:40:16 +0000 juancho]]> https://virtuino.com/forum/showthread.php?tid=22281 Can you send a variable from the Arduino, ESP32 module to the app without the latter having started the connection. Virtuino 6 app.
That is, without the app sending a request for the value of the variables, from the Arduino board you can make a connection to the app to send it the value of a variable.
I need this to do it more in real time and not wait for the app to ask the Arduino for the variables. Thanks.]]> Can you send a variable from the Arduino, ESP32 module to the app without the latter having started the connection. Virtuino 6 app.
That is, without the app sending a request for the value of the variables, from the Arduino board you can make a connection to the app to send it the value of a variable.
I need this to do it more in real time and not wait for the app to ask the Arduino for the variables. Thanks.]]> <![CDATA[Internet Communication]]> https://virtuino.com/forum/showthread.php?tid=21948 Tue, 05 Nov 2024 03:11:14 +0000 ebautec]]> https://virtuino.com/forum/showthread.php?tid=21948 Which of the 2 Virtuino IoT or Virtuino 6 applications can connect outside the Wi-Fi network over the internet? Do you have any configuration example?
Virtuino 6 works perfectly but within the range of the WiFi network. Thank you]]> Which of the 2 Virtuino IoT or Virtuino 6 applications can connect outside the Wi-Fi network over the internet? Do you have any configuration example?
Virtuino 6 works perfectly but within the range of the WiFi network. Thank you]]> <![CDATA[Sending Android System Time Stamp to Arduino]]> https://virtuino.com/forum/showthread.php?tid=21935 Mon, 12 Aug 2024 21:28:43 +0000 JimKazmer]]> https://virtuino.com/forum/showthread.php?tid=21935 <![CDATA[Input of negative values]]> https://virtuino.com/forum/showthread.php?tid=21934 Tue, 06 Aug 2024 18:28:40 +0000 DF5EQ]]> https://virtuino.com/forum/showthread.php?tid=21934
I cannot type in negative values in different locations.
Attached is a screenshot for the start value of a range.

I'm running Virtuino 6 ver 6.0.34 Pro on Android 14 on a Samsung Galaxy A53

Bye, Peter

.png   screenshot.png (Size: 218.18 KB / Downloads: 5) ]]>
I cannot type in negative values in different locations.
Attached is a screenshot for the start value of a range.

I'm running Virtuino 6 ver 6.0.34 Pro on Android 14 on a Samsung Galaxy A53

Bye, Peter

.png   screenshot.png (Size: 218.18 KB / Downloads: 5) ]]> <![CDATA[Virtuino 6 crashes when testing Twitter connectivity]]> https://virtuino.com/forum/showthread.php?tid=21188 Thu, 04 Jul 2024 13:28:29 +0000 Grinkor]]> https://virtuino.com/forum/showthread.php?tid=21188 in Virtuino Modbus it seems to work OK. Am I forgetting something? Thanks!]]> in Virtuino Modbus it seems to work OK. Am I forgetting something? Thanks!]]> <![CDATA[Bluetooth connection refining]]> https://virtuino.com/forum/showthread.php?tid=2229 Sun, 26 May 2024 09:59:10 +0000 Araqel]]> https://virtuino.com/forum/showthread.php?tid=2229
I did a project for a tape player remote control, which also has an Adafruit FM broadcaster connected. Having noted that every bluetooth seance with server raises noise in demodulated FM signal, I have reduced the refresh time to 100 seconds as a trade-off between performance and quality. This large period does not affect commands, sent from phone to server, which takes place immediately. But feedback signal from server comes back to phone as per defined server's refresh setting only. How could this be fixed to get the same performance, as happens to commands, sent from phone to server direction?]]>
I did a project for a tape player remote control, which also has an Adafruit FM broadcaster connected. Having noted that every bluetooth seance with server raises noise in demodulated FM signal, I have reduced the refresh time to 100 seconds as a trade-off between performance and quality. This large period does not affect commands, sent from phone to server, which takes place immediately. But feedback signal from server comes back to phone as per defined server's refresh setting only. How could this be fixed to get the same performance, as happens to commands, sent from phone to server direction?]]> <![CDATA[Problem using "RGB led and controller" together with MQTT]]> https://virtuino.com/forum/showthread.php?tid=2152 Wed, 15 May 2024 19:54:38 +0000 danman]]> https://virtuino.com/forum/showthread.php?tid=2152
I have problems using the "RGB led and controller" widget in Virtuino v6.0.34 on my Android phone:

I've configured four sliders controlling the red, green, blue and white LEDs of an LED strip using MQTT. No problem with these four widgets. When I move a slider I can see the published values with "mosquitto_sub" on my home server. See "panel_on_slider_change.png" and the corresponding output of "mosquitto_sub" in "mosquitto_sub_output_on_slider_change.png". I've also made a screenshot of my configuration (see "slider_config.png" and "topic_config.png").

When I choose a colour with the mentioned "color picker" (which uses the same topics - without the white color of course - see "picker_config.png") the sliders follow the picker correctly (they visualise the color I've "picked"). But the values received by my server are completely weird. I receive values for "blue" only - and even these values aren't correct (for me they look somehow random).

Does anyone have an idea what's wrong with my setup/config?

.png   slider_config.png (Size: 464.88 KB / Downloads: 3)

.png   topic_config.png (Size: 223.58 KB / Downloads: 2)

.png   panel_on_slider_change.png (Size: 359.88 KB / Downloads: 2)

.png   mosquitto_sub_output_on_slider_change.png (Size: 2.78 KB / Downloads: 2)

.png   picker_config.png (Size: 152.36 KB / Downloads: 2) ]]>
I have problems using the "RGB led and controller" widget in Virtuino v6.0.34 on my Android phone:

I've configured four sliders controlling the red, green, blue and white LEDs of an LED strip using MQTT. No problem with these four widgets. When I move a slider I can see the published values with "mosquitto_sub" on my home server. See "panel_on_slider_change.png" and the corresponding output of "mosquitto_sub" in "mosquitto_sub_output_on_slider_change.png". I've also made a screenshot of my configuration (see "slider_config.png" and "topic_config.png").

When I choose a colour with the mentioned "color picker" (which uses the same topics - without the white color of course - see "picker_config.png") the sliders follow the picker correctly (they visualise the color I've "picked"). But the values received by my server are completely weird. I receive values for "blue" only - and even these values aren't correct (for me they look somehow random).

Does anyone have an idea what's wrong with my setup/config?

.png   slider_config.png (Size: 464.88 KB / Downloads: 3)

.png   topic_config.png (Size: 223.58 KB / Downloads: 2)

.png   panel_on_slider_change.png (Size: 359.88 KB / Downloads: 2)

.png   mosquitto_sub_output_on_slider_change.png (Size: 2.78 KB / Downloads: 2)

.png   picker_config.png (Size: 152.36 KB / Downloads: 2) ]]> <![CDATA[Virtuino with Bluno Mega by DFRobot]]> https://virtuino.com/forum/showthread.php?tid=2146 Thu, 18 Apr 2024 21:47:15 +0000 xmilav]]> https://virtuino.com/forum/showthread.php?tid=2146 Good night. I am developing a project with Arduino Mega and Viretuino6 with Bluethoot HC06.
I need the 3 series ports to communicate with different peripherals.
But one is used by the Bluethoot module.
I have thought about using the Bluno Mega from DFRobot that has Bluetooth integrated but I don't know how to adapt it to the Virtuino routines.
Has anyone used Virtuino with the DFRobot Bluno Mega?
Thanks for the advance


]]> Good night. I am developing a project with Arduino Mega and Viretuino6 with Bluethoot HC06.
I need the 3 series ports to communicate with different peripherals.
But one is used by the Bluethoot module.
I have thought about using the Bluno Mega from DFRobot that has Bluetooth integrated but I don't know how to adapt it to the Virtuino routines.
Has anyone used Virtuino with the DFRobot Bluno Mega?
Thanks for the advance


]]> <![CDATA[Configurar retorno na conexão HTTP]]> https://virtuino.com/forum/showthread.php?tid=2137 Mon, 25 Mar 2024 14:21:32 +0000 EMERSON RIBEIRO]]> https://virtuino.com/forum/showthread.php?tid=2137 <![CDATA[Alguém conseguiu fazer o GPS funcionar]]> https://virtuino.com/forum/showthread.php?tid=2136 Wed, 20 Mar 2024 17:09:01 +0000 EMERSON RIBEIRO]]> https://virtuino.com/forum/showthread.php?tid=2136