+- Virtuino Forum (https://virtuino.com/forum)
+-- Forum: Virtuino (https://virtuino.com/forum/forumdisplay.php?fid=1)
+--- Forum: Virtuino 6 (https://virtuino.com/forum/forumdisplay.php?fid=3)
+--- Thread: esp32c3 (/showthread.php?tid=1525)
esp32c3 - gas - 12-12-2023
Hi,
launched "Virtuino esp32 example" in Arduino Ide, I had this errors messages:
"\Arduino\libraries\Virtuino_library_for_all_ESP8266_and_ESP32_boards\VirtuinoESP.cpp: In member function 'String VirtuinoESP::urlencode(String*)':"
and
"\Arduino\libraries\Virtuino_library_for_all_ESP8266_and_ESP32_boards\VirtuinoESP.cpp:102:10: error: variable 'code2' set but not used [-Werror=unused-but-set-variable] char code2;"
Any help?
Thanks in advance.
RE: esp32c3 - iliaslamprou - 12-13-2023
Hi,
this is a very old library.
Please try to use the newer libary VirtuinoCM.
These are some tutorials:
https://www.youtube.com/playlist?list=PLJjsiaLsFe0ESdpuRGUn_k9uPEs3gYJCz
RE: esp32c3 - gas - 12-14-2023
(12-13-2023, 10:02 PM)iliaslamprou Wrote: Hi,
this is a very old library.
Please try to use the newer libary VirtuinoCM.
These are some tutorials:
https://www.youtube.com/playlist?list=PLJjsiaLsFe0ESdpuRGUn_k9uPEs3gYJCz
Hi,
my actual VirtuinoCM library installed is v. 1.0.2.
RE: esp32c3 - iliaslamprou - 12-17-2023
Hi,
I think the sketch is not correct.
Please upload your sketch here