![]() |
ThingSpeak chart - Printable Version +- Virtuino Forum (https://virtuino.com/forum) +-- Forum: Virtuino (https://virtuino.com/forum/forumdisplay.php?fid=1) +--- Forum: Virtuino IoT (https://virtuino.com/forum/forumdisplay.php?fid=2) +--- Thread: ThingSpeak chart (/showthread.php?tid=1374) |
ThingSpeak chart - samxhot - 08-15-2023 Hello, I have a ThingSpeak chart that updates every 1 minute. The data are collected to ThingSpeak every minute via MQTT protocol In my Virtuino project I select "chart data period" = Last day and the data are ploted OK in the chart. The problem now is that on next minute (+1) that the chart is updated automatically, the x-axis (period) changes to a larger period (+5 hours) The next minute(+2) the x-axis period is now (+5 hours) and so on. After some minutes the data line is just a virtical line because the period is too large. Is there any setting that holds the x-axis period stable and the chart will just shift in the screen? After refresh. Minute 0 Minute +1 Minute +2 Minute +5 RE: ThingSpeak chart - ankitkumar - 08-17-2023 (08-15-2023, 07:32 AM)samxhot Wrote: Hello, RE: ThingSpeak chart - samxhot - 08-31-2023 Hello people, Is there any answer for my question about thingspeak chart? |