+- Virtuino Forum (https://virtuino.com/forum)
+-- Forum: Virtuino (https://virtuino.com/forum/forumdisplay.php?fid=1)
+--- Forum: Virtuino IoT (https://virtuino.com/forum/forumdisplay.php?fid=2)
+--- Thread: Rotary switch: default starting position (/showthread.php?tid=1261)
Rotary switch: default starting position - Dkyndt - 04-13-2023
Is there a way that I can set a starting position for a rotary switch?
Can I also retain this position?
Let say I have a switch with 3 positions:
Pos 1: Off
Pos 2: auto
Pos 3: on
I want the switch to always be in position 2, except for when I change it.
RE: Rotary switch: default starting position - iliaslamprou - 04-13-2023
Hi,
you have to add a starting value to the rotary switch variable. Just open the variable settings to do it.
RE: Rotary switch: default starting position - Dkyndt - 04-14-2023
(04-13-2023, 09:21 PM)iliaslamprou Wrote: Hi,
you have to add a starting value to the rotary switch variable. Just open the variable settings to do it.
Thank you, this what what I needed.